A friend made this after her second playthrough of the EW MSQ. [Spoiler: Zone 5 spoilers]

2022.01.20 17:35 theCleversleazoid A friend made this after her second playthrough of the EW MSQ. [Spoiler: Zone 5 spoilers]

submitted by theCleversleazoid to ffxiv [link] [comments]


2022.01.20 17:35 megaratron [Tenant - WA State USA] Asking for a rent reduction?

Hello Landlords,
I (and my roommate) have lived in our apartment for 3 years and will likely resign our lease for a 4th year. We have a very good relationship with our landlord and have never had any issues with our neighbors. It's a 6-unit building with 3 units on each floor, all the layouts are basically the same. While browsing apartment rentals in our area, I found the posting for the same unit as ours upstairs. The posting was for $160 less than what my roommate and I are paying now. The unit upstairs has entirely hardwood and a large closet that ours doesn't have. Could we ask our landlord to match the price of the unit upstairs? What would be a good way to go about this?
Thank you!
submitted by megaratron to Landlord [link] [comments]


2022.01.20 17:35 NSeaThrowaway07 Read all about it. The Science

Read all about it. The Science submitted by NSeaThrowaway07 to bayarea [link] [comments]


2022.01.20 17:35 Aymahkhan_ New YouTube video is up!! My YouTube channel: https://youtube.com/channel/UC3L1oHis_lYphISo9KVCzyQ Don’t forget to like, share, comment and subscribe to My YouTube channel.

New YouTube video is up!! My YouTube channel: https://youtube.com/channel/UC3L1oHis_lYphISo9KVCzyQ Don’t forget to like, share, comment and subscribe to My YouTube channel. submitted by Aymahkhan_ to YoutuberPromotions [link] [comments]


2022.01.20 17:35 DorianSegar (Im mainly looking for the mangle cpu)

(Im mainly looking for the mangle cpu) submitted by DorianSegar to FnafAr [link] [comments]


2022.01.20 17:35 LokiLong1973 Veeam taking AGES to initialize storage and doing actual backups.

Veeam taking AGES to initialize storage and doing actual backups. My backups are taking insanely long. The backup process starts and then gets stuck on "Initializing storage" for over 10 minutes and then it takes a long time before it actually starts transferring data.

https://preview.redd.it/dkb0ygslkwc81.png?width=498&format=png&auto=webp&s=eb41557edc6a51fd8c6da9bcf837ac1caf115e6c
As you can see, I'm using SAN connection (so no nbdssl or). Also it's telling me it's using Change Based Tracking, but it almost looks like it's scanning the disks...
Using iSCSI with MTU 9000 across the whole storage network. Machine is running on Windows Server 2022. It has been working fine for a long time, even after upgrading to Windows 2022.
Any clues someone?
submitted by LokiLong1973 to Veeam [link] [comments]


2022.01.20 17:35 quinotator101 Helping SaaS Founders grow revenue

Hi,
I am looking to help a few SaaS founders with their Sales.
Why?
I am a College Student with a Major in Entrepreneurship and Sales. I’ve learned a lot in classes but want to be practical and actually apply some of the knowledge I have.
My goal is two fold 1.) Build my Sales skills by helping you grow your revenue. 2.) Build relationships with smart, hardworking entrepreneurs.
I can provide more info if anyone is interested. PM me.
submitted by quinotator101 to SaaS [link] [comments]


2022.01.20 17:35 random-danishguy Thanks to the redditors here who helped me, learn to make cooler thumbnails like this one:)

Thanks to the redditors here who helped me, learn to make cooler thumbnails like this one:) submitted by random-danishguy to assettocorsa [link] [comments]


2022.01.20 17:35 dudewafflesc Seeking Graphic Designer

Looking for an experienced and talented full time graphic designer to work 40+ hours per week for competitive pay in the mid 40s and benefits. Can be WFH or office in nearby Blacksburg or hybrid. We are a faith based non-profit, so this is your chance to use your talent to change the world. Apply: www.parfm.com/designer
submitted by dudewafflesc to JohnsonCityTN [link] [comments]


2022.01.20 17:35 oceaneyes_32 Any PHY137 group chats?

WhatsApp, discord, Facebook, anything please lol. I couldn't find one anywhere.
Thank you!
submitted by oceaneyes_32 to UTM [link] [comments]


2022.01.20 17:35 Venzhas I founded back some outfits I draw years ago being bored. I believe this was Pizza Dwight, Karen Kate, Bug Nurse, Ethnic Jake and Mermaid Spirit

I founded back some outfits I draw years ago being bored. I believe this was Pizza Dwight, Karen Kate, Bug Nurse, Ethnic Jake and Mermaid Spirit submitted by Venzhas to deadbydaylight [link] [comments]


2022.01.20 17:35 down_in_the_dirt Sleeping on duty…

Do you ever sleep on the clock? I don’t care if your job sucks or if it’s the best in the world. Is it possible to sleep your career away?
submitted by down_in_the_dirt to antiwork [link] [comments]


2022.01.20 17:35 Top_Force_707 Lo sabía 😳

Lo sabía 😳 submitted by Top_Force_707 to LMDShow [link] [comments]


2022.01.20 17:35 United_Federation What to do with crappy filament

So Ive been printing for about a year now, and have learned... alot over that time. When I bought my printer I didnt know anything about it other than it was cool, and that I am otherwise quite technically inclined and can learn along the way. Though I did that, I made one large mistake right off the bat, I bought some of the crappiest cheapest chinese PLA off amazon for like $18. I have tried and tried and tried fan settings, speed, extrusion multipliers, movement speeds, temperatures, first level Z distances.... no matter what I do I cannot get this crap to stick to the bed. I now use hatchbox. Its fantastic. No fuss. Works right out the box with the prusa slicer profiles. if I use hatchbox for the first several layers, then switch filaments to the chinese crap it works fine, but the stuff will not stick to the bed. I am fed up with it and I have near 900g of it left.

Memes or seriousness IDK I need to use this stuff up so it doesnt take up space in my dry box.

oh and yes, I doo keep everything dry with desiccants and at room temp. The filament isnt brittle and doesnt pop or foam like its taken on water. I dunno why its bad, it just is. Probably a factory materials thing.
submitted by United_Federation to 3Dprinting [link] [comments]


2022.01.20 17:35 KenshyShy (post 9) Level 1?

Day 109 - I believe that after months of exploring this wasteland, I've found a way to level 1. There's a stairway leading up to what looks like a bar-push door, as well as an unlit hallway beneath it. I obviously took the stairway, and was met with a long hallway, unlike the others. This one had marble-like tiled floors, and doors along each side. Room 200912804333021, Room 3, Room 3.14159265 3589793238462..., Room 87.
The rooms went on, with oddly numbered labels. The third room's label that listed all digits of pi was wrapped around the wall at the end of the hallway, presumably leading on forever. I walked along the doorways until I was met with two hallways branching off diagonally. The left one read: "Right", and on the right read: "Već posjećeno". I used my phone to try and translate whatever this sign read, and came up with "déjà visité".
Apparently, déjà visité is like déjà vu, but is for places and locations. I shrugged it off and took the "Right" hallway, before being met with a twisted snarling, echoing against the walls towards me. I quickly turned around and went down the other pathway, beginning to see a faint light at the end. As I looked back to see how far I'd walked, I was dumbfounded to see that I had actually went farther back than I previously was. I was a bit anxious, but kept going, walking as far as I could without looking back. Before I knew it I was in what i had believed to be my bedroom, though the walls were a bit brighter, my desk was completely different, there were no windows, except for a small glowing square where my left window had used to be.
It was as if someone had re-decorated my room and somehow changed the size of it as well. I turned around to try and see if my doors worked, possibly leading me to my kitchen where I could escape through the entrance-door, only to be met with that tiled hallway, turning back around to see the fork in the road once more. I paused for a moment, figuring out how this thing worked. I went back down the "Već posjećeno" hallway and ended up in another different 'my-room', before placing down my duffel bag and taking a nap on the oddly familiar bed.
submitted by KenshyShy to TheBackrooms [link] [comments]


2022.01.20 17:35 Reppate A little birdhouse

submitted by Reppate to lego [link] [comments]


2022.01.20 17:35 ProfessorCynical1 How To Get A God Tier Ship For Ultimate POWER!!!! - No Man's Sky

How To Get A God Tier Ship For Ultimate POWER!!!! - No Man's Sky submitted by ProfessorCynical1 to no_mans_sky [link] [comments]


2022.01.20 17:35 NakdRightNow69 Game stop movie coming the 28th.

Game stop movie coming the 28th. submitted by NakdRightNow69 to GMEJungle [link] [comments]


2022.01.20 17:35 Keksdosendieb USAU doesn't want us to tell Nkolakovic what a great job he did by turning off the commentsection

USAU doesn't want us to tell Nkolakovic what a great job he did by turning off the commentsection submitted by Keksdosendieb to ultimate [link] [comments]


2022.01.20 17:35 Plato1997 Question about towns

Constantly when I invite a player to my town, after a while (about 30 seconds) he leaves the town. Is there some problem with the town settings ?
submitted by Plato1997 to EarthMC [link] [comments]


2022.01.20 17:35 Mysterious-Flamingo4 IU vs Purdue

Anyone know where I can park for free within walking distance of Simon Skjodt? Also how’s the line looking rig now and when should I go?
submitted by Mysterious-Flamingo4 to IndianaUniversity [link] [comments]


2022.01.20 17:35 NegaTheImpmon9508 blursed_nuggies

blursed_nuggies submitted by NegaTheImpmon9508 to blursedimages [link] [comments]


2022.01.20 17:35 FatHans is WWE 2k22 going to be on PC on release day?

Does anyone know?
submitted by FatHans to WWEGames [link] [comments]


2022.01.20 17:35 adielpatrick Wip double antenna zaku desert type. Almost done

Wip double antenna zaku desert type. Almost done submitted by adielpatrick to Gunpla [link] [comments]


2022.01.20 17:35 hello_newfriends New housing model supports people with complex challenges

submitted by hello_newfriends to vancouver [link] [comments]


http://kpksoyuz.ru